Seal type
Lead
Diameter, mm
10
Temperature range of application
from -80°C to +100°C
Lead indicator seals
Description of lead indicator seals
Indicator lead seals are made in the form of washers with a diameter of 10 mm. Lead seals are intended for sealing objects or premises to which access must be restricted. This type of seal has been used since the 19th century.
During installation, the lead seal is uniquely stamped by a special sealer so that during inspection the seal can be identified and replaced. Lead is a plastic and viscous material, thanks to which the impression left on the seal is clearly visible.
Lead seals are used for sealing:
- warehouses, safes
- premises, doors
- metering devices
- containers, packaging, containers
- equipment
- vehicles
In order to fix the lead seal on the object, a sealing cable and a special sealer are needed.
For installation, it is necessary to pass the cable through the holes or lugs of the object to be sealed, then pass both ends of the cable into the holes of the seal and clamp it with a sealer. For reliability, it is important to monitor the tension of the sealing cable, bringing the indicator seal as close as possible to the object.
Lead seals are used in many spheres of activity, when sealing meters (gas, water, electricity), to limit access to fuel tanks and transport, in banking, agriculture, etc.




